Last Updated on July 31, 2021 by PATRICIA LINDA
We need wooden items in our everyday life. So, wood parts of different types can shape into perfect shapes and sizes. Specially carpentry use many saw in their work. Table saw is one of them. First, we have to know what is a table saw and how it works on wood. In different ways to cut wood table saw is an essential tool. Any hand saw is a serrated blade that can help to cut wood nicely. A table saw is a useful handy cutting tool that attaches to table cutting work. Using a table saw to cut angles on the table board is not difficult at all. A miter jig also adjusts with a table saw when you are going to buy. This miter jig helps to measure the wood part and cut the angles accurately. The following article is meant for you if you believe trimming wood corners is not an easy task. Here you can know how the Table saw works for that step by step.
Firstly, you should arrange these vital things that attach with a table saw. So you can perform your work correctly. Then, you need to arrange and organize in advance of cutting of wood angles that you need to prepare and set up. Somehow, you create tools that create a perfect combination of your work. Proper preparation can solve the waste work and waste wood part and do a job well!
Some essential tools need for you:
- A Table saw
- Miter gauge
- Taper gauge for long and bevel cuts of wood
- Wooden plunk switch
- Tape measure or measurement instrument or Ruler
- Sharping pencil to draw
- Drafting triangle or framing square
- The magnifying glass whenever possible to arrange
- Pencil sharpener and eraser to erase mistakes
- To avoid waste of wood, need a push stick
- Safety gear (Safety glass for eye protection, dust mask, earplugs, or fence clamps)
- When you arrange these tools, you will easily cut right angles so that your working process will run smoothly.
Steps to cutting angles on a table saw
If you have an odd angled wood part, it requires cutting perfectly to get the correct shape. So, it is vital to use a high-performance Table saw that can help you make cuts smoothly and remove difficulties. The table saws are an exact tool that can cut right angles 90 – degree cut easily. Also, a 45 degrees cut of an angle gets not so much time and is preferable with a table saw. The table saws include different angle indicators. So, it may help your need one. Here, I have listed some steps to follow. It will help to cut angles in the right way and get the proper instruction.
Adjusting the wood and table saws:
When you work on a table saw, ensure that you check always turn off the switch pluck not working time. It might happen in accidents and cause injury. Because in working time you very close to saw blades. So, it is necessary to off the plug for safety. Safety is crucial when adjusting your table saws at a cutting angle.
Select perfect angle:
Using one 90-degree side with the miter gauge and aligning it with the other 90-degree side, make sure you have the perfect right angle between the miter gauge and blade. You can determine and trying to cut your desire angle measure with measure tape as well. It would get an accurate size of your wood part.
Use a ruler to indicate:
Secondly, mark the beginning and end of the cut with the point. And be sure to sketch a thick, dark line with a ruler over the board. Ensure that the sketched outline on the board is straight and correct with the help of a ruler. Make sure this sketch line shows the essential elements for your accurate, easy work. Last time take a second to measure your angle again and recover the mistake to get smooth results.
Adjust the saw height:
Adjust the elevation of your portable saw blade. Table saw blade height is 0.64 cm or1/4 in with a crank situated inside the saw. Now the cutting edge can move up and lower. On broken wood, adjustment need properly by using a ruler to perfect measure. Then place the piece of hardwood beside the saw and label the 0.64 cm mark. Align the saw with the point of the square. When the table saws blade reaches the line, elevate the saw. It is easier to achieve a smooth cut by raising the cutting height of the saw. As a result, if you are unsure of the correct height of wood to keep the saw level, use your discretion.
Setting the wood at an angle for crosscut:
Firstly, preparing to draft for crosscut. A combination drafting tool is a necessity for measuring any material, such as wood. When you go to work then need to clear all things before using a drafting triangle. And do not forget to create crosscuts across the wood board width and carefully cut along the edges. If you got some problem with this, you might use a taper jig to cut wood lengthwise. Framing square or another crosscut or any combination drafting tool can use instead of drafting triangle.
Set a miter gauge for cutting angles:
You can use a miter gauge to hold the wood at an angle as you cut its angled. A miter gauge is a handy device that can help to cut on a table saw. And it should fasten firmly against the drafting triangle edge. Two sides of a drafting triangle are flat, while one side is diagonal. If you are setting an angle, adjusting the flat edges is usually easier.
Open the taper jig to Bevel cut:
A tapering jig is a woodworking jig that can use in a table saw. Mainly this tapper jig uses to make table legs inside part measuring. These taper jigs serve as a back brace for aboard. To prevent fingers from touching the blade when making bevel cuts, it is an excellent tool. When you operate the circular saw, you can use a ruler to measure perfectly between the endpoints of wood. This taper jig uses instead of a miter gauge. Alternatively, you are comfortable with a miter gauge then, no need to use this taper jig.
Move the miter gauge:
You can move the miter gauge in the cutting time of wood. In each case, the miter gauge’s handle will move and point to a specific angle marking. The handles of the miter gauge should display the correct angle for your project. Counterclockwise rotation locks the handle in place.
Secure a fence:
A Table saw has a secure fence that can give extra safety or security. This secure fence makes with a metal bar. In working, time use a secure fixture to brace the miter or taper jig gauge around the surface saw and slide a piece of scrap wood into the clamp on the front of the taper jig. Additionally, you can slide scrap wood into the clamps on the taper jig or the miter gauge. When your work completes, remove the drafting triangle from the surface, and replace it with the security fence.
Conclusion
Finally, these step-by-step processes are vital to a successful table saw cutting angle routine. To ensure good quality cuts and safety, one needs to follow every single step. In addition, a few tips and tricks on angle cutting follow. So, I hope you enjoyed this article about cut angles on a table saw and improve your work quality.
Leave a Reply