How to use a chainsaw easily

Last Updated on June 25, 2021 by PATRICIA LINDA

A chainsaw is the perfect tool to cut the tree log quickly. It’s a dense and energetic tool that works for high performance. But you have to know a better use system to reduce the wood correctly. Different types of brands do extra work. A correct operating system can finish the cutting process as woodcutter want.

Relevant material and tools kit 

Firstly, you can select the maintenance tool for operating the chainsaw. You can read the manual guidebook for proper knowledge. Some essential things that are essential to produce a chainsaw. Here are some given below-

• The Perfect work can finish with a chainsaw.
• Protect sudden damage to wearing a tight, thick cloth.
• To protect the eye and the ear to use a helmet or a hard-type hat.
• Hand gloves needed must.
• For your leg protection, you should wear logging boots that make of steel.
•  SAE 30 oil, gas, and chain oil needs to run the chainsaw.

Uses your chainsaw

Step 1

When you go to cut the tree with a chainsaw, you should know how to operate it. So it’s a great option to read the manual for taking helpful information. And you can prevent an uncertain accident.

Step 2

Secondly, you will fill the chainsaw blade full of oil. SAE 30 oil is perfect for the saw blade. If you can’t select the right oil for your chainsaw, yours saw blade will burn and damage. That’s why careful to fill the fat that is not weighted.

Step 3

An electric chainsaw is better for the woodcutter, who is a small person. You plug the cord with the electrical portion.

Step 4

You clean the cut area. When you cut, the tree ground side has to very perfectly clean.

Step 5

A chainsaw works a different type of work. You should care of 4 essential things are-

• Felling: Felling is for cutting the big tree part.
• Lambing: The rest of the lambing and branches can get after cut the big tree.
• Trimming: This is what the cutting limb tree cut or takes off from the trees.
• Bucking: Bucking is the rest of the final cutting log.

Step 6

When everything is ready to cut the tree, you should recheck the chainsaw for perfection.

Step 7

The chainsaw has an Anti-kickback system that protects you from a sudden accident. This option provides you safety.

Step 8

You take extra tools like- hammer, wedge, or ax. That would help you cut the tree without any difficulties.

Step 9

You check the chain carburetor of the premium bulb. And air filters, lubricators for getting the power of the source.

Step 10

After finish the cutting tree, you have to care about cleaning the saw and cool it down for long-lasting use. And for safety, you need to take out all fuel from it.

Sharp the chainsaw

A chainsaw can use longer for a proper maintenance system. So, the chainsaw must be sharpening. A dull chainsaw cannot cut the tree properly. You have to pressure more to cut. However, the most valuable part is flat or blunt chainsaw is not lasting for a long time. Here are some necessary steps to make the sharp chainsaw-

• Firstly, you need to hand gloves to hold the chainsaw. Then make sure to activate the brake to lock the chain for sharpening.
• The chainsaw has rivets that sharpen the teeth atomically towards the guide nose bar part.
• Replace the cutter teeth on the top of the plate, which you have to check for proper arranges.
• If you want to proper shiny and silver chain, then you can use 2 or 3 strokes.
• At the end of the sharp teeth, remove the chain from the breaking point. Then you begin this part again for sharping teeth that the right way to sharp teeth repeats about three times.
• You can get a high depth gauge from the tools of measure more times. This depth gauge is standing between the cutting teeth.
• For a long time, sharp the process repeat and make sure not junk in the teeth side.

Chainsaw needed care of maintenance. Use verities of tools to make it for durability. Some maintenance tips are below-

• Required to operate chainsaw is safely and perfect.
• Necessary to adjust the combo screwdriver “Scrench” for tight or loose correction with the tension part. This part of the work does the maintenance of the chainsaw.
• You need to clean the bar and tools every day after use because some debris stuck in it and sawdust, tree sap, or spoil oil can damage the chainsaw.
• All clutches should cover, and brake parts need to remove from blades.
• Every time, before use, you must check all tool arrangements for selection.
• The sharp chainsaw provides more smooth work and reduces kickback for the sudden accident. And ensure safety for the woodcutter.

Important Maintenance tool

Without any exceptional device, you did not cut the tree. All heavy-duty base tools keep inside a toolbox for safe storage. All are greatly affected by the maintenance chainsaw. Some tools are-

• All wrenches and screwdrivers use for tight or loose options.
• Includes a round file that is 5/32”, 3/16” and 7/32” Round file and a file gauge.
• A Flat file is 6” inches that storage information.
• High-depth gauge tool.
• Cleaning cloth to remove dust.
• Also, insert pair of Foam between the Earplugs and the Case.
• For selection, it has seen documentation.

Safely operate the chainsaw

Some things are essential to know about running a chainsaw. There is a unique option for perfect starting in your goal. Little discussion is I below-

Kickback: At the top of the sides of the chainsaw, the bribe is the more important part. These things cause some uncertain accidents. Low payment is safe for work. You hold the saw tightly and firmly to avoid dangers. IN modern times all chainsaw has Anti-kickback that provides faster work without any threat.

Pinching: A pinching is a bar that includes in a chainsaw. Most of the tree log is so hard to cut. At that time, it is pinching to squeeze the two planks of wood together. And it can prevent the kickback of chainsaws. You can avoid this bar use of several techniques.

Finally, I want to tell you, if you wish to operate a chainsaw, you should follow that topic that I mentioned. It will easy to manage your chainsaw.